Sonnys Enterprises

Resources 8

• Equipment Base Settings
• 10,15,20,25,30 Horse Power Turbine Decibel Reading
• Sonny's Equipment Nozzle Chart
• Conveyor Power Pack Tire Seal Conversion
• Hydrominder Solution Chart

View all 8

Sonny's FAQ Videos 8

• How To Use LED Light's To Produce a Great Show
• Enhance the Customer Experience With Your Car Wash Foam Show
• How To Properly Clean Your Equipement
• Where Should I build A Car Wash
• The importance of Brush Lubrication

View all 8

Blowers 4

• How to Maintain the Gator-Gates on your Sonny’s Blowers
• How to Maintain the Silencers on your Sonny's Blowers
• How to Properly maintain your Sonny's Blower Motors.
• How to Maintain and Adjust the Flip options on Sonny’s Blowers.

Conveyor FAQ 14

• Conveyor Is Not Turning On
• My conveyor is not moving
• The seals on the Heco gearbox keep wearing out prematurely
• When should I replace my chain and rollers
• Roller Jams at the entrance of the conveyor

View all 14

CTA Tire and Wheel Applicator FAQ 0

Chemical Applicators FAQ 5

• No Foam Coming Out of My Foaming Applicator Arch
• Pivoting Applicator Arch Manifolds Not Pivoting
• No foam coming out of my CTA's
• Foam Is Coming Out Too Wet - More Chemical Than Foam
• Chemical siphoning back into the chemical drum

High Pressure FAQ 12

• Omni Losing Pressure
• No water coming out of my High Pressure Equipment
• Omni basket not moving smoothly
• My Spinners Are Not Spinning
• My Omni baskets are slamming

View all 12

Mitter FAQ 3

• How to Properly Maintain your Sonny's Mitter
• My Mitter Baskets are Not Moving
• Mitter is Making Noises

Prep Gun FAQ 3

• Pump Troubleshooting Chart
• My Pump Manifold Cracked
• Oil Spilling From the Fill Hole

Pre-Soak Applicator FAQ 0

Rain Arch FAQ 0

Side Brush FAQ 2

• How to Adjust the Shock on the Side Washers.
• How to Maintain the Sonny's Side Washers.

Tire Brush FAQ 3

• How to Adjust the Retract on Sonny's TBG300 Tire Brush
• How to Adjust the Inward Pressure on Sonny’s TBG300 Tire Brush
• How to Adjust the Rotation on your Sonny’s TBG300 Tire Brush

Top Brush FAQ 5

• How to Adjust the Counterweight on your Top Brush
• Top Brush Does Not Come Down
• Top Brush Coming Down To Fast
• My Top Brush Is Ripping Off Antennas
• How to Properly Maintain the Sonny's 2K14 Top Brush

Vacuum FAQ 4

• Turbine System Has No Suction
• Turbine Estimated Decible Levels
• How Many Vacuum Spots Are Needed To Satisfy Your Cusotmer's
• 30 HP - Vacuum Producer Coupler Installation

Wrap Around FAQ 10

• Wrap Brush is Very Aggressive
• Proper Wrap Brush RPM
• Rotation of the brush
• My Wraps Are Breaking Mirrors
• Restrict -O-Flex Coupler Mounting

View all 10

Photo Eyes FAQ 2

• Testing the Photo Eyes
• Photo Eye Troubleshooting Chart

Anti Collision FAQ 2

• D-Tek Loop Detector Trouble Shooting Chart
• EMX/D-TEK Installation Instructions

Prep Gun Automatic Control FAQ 1

• Prep Gun Automatic Control Box

Tire Seal PLC FAQ 1

• How do I program my Tire Seal PLC

Hydrapulse Switch FAQ 2

• How to program the Hydrapulse Switch
• Hydrapulse Pulse Fluctuation

GO Pulse Switch FAQ 1

• Wiring The GO Switch

Power Pack Low Level Switch FAQ 1

• Testing the low level switch

Conveyor Low Air Pressure Switch FAQ 1

• Calibrating The Low Pressure Air Switch To The Conveyor Chain

HP Pump Low Water Level Switch FAQ 0

Tape Switch FAQ 0

EMX Loop Detector FAQ 1

• EMX SP-24 TroubleShooting

Foaminator MAXX Stream 0

Foaminator MAXX Sheet 2

• Foaminator Sheet
• How to Maintain and Adjust the Foaminator MAXX Sheet.

Foaminator II Triple Fusion 0

MFR400 0

Arches 1

• How to Wire A Grand Entrance Arch

LED Lights 0

Banana Foamers 1

• How to maintain and adjust your Banana Foamers

Air Compresors 3

• How to Maintain the oil on your Air Compressor.
• How to Maintain and replace the Air filters on your Air Compressor.
• How to Maintain the automatic tank drain on your Air Compressor.

Chemical Applicators FAQ 0

Chemical Concierge FAQ 0

Chemical Dispensing System FAQ 1

• How to Adjust a Dosatron Pump

Chemical Pump Station (G57, Graco etc..) FAQ 0

Goulds Pump Service 2

• How to Replace and Repair Stack and Mech Seal on the Xylem e-SV
• Different Pipe Connections Available on the Xylem e-SV.

HP Pump Station FAQ 7

• Wanner Pump Troubleshooting Chart
• Pump Running Rough
• Drop in Water Volume or Pressure
• HOW TO INSPECT THE VALVES FOR DEBRIS
• How to Test and Replace the low-level Switch on your Sonny’s High-Pressure pump station.

View all 7

Parts FAQ 7

• What Kind Of Oil Should You Use In Your Lubricator Bowls
• Hydrominder Troubleshooting Chart
• Sonny's Heco Speed Controller
• Mac Valves Are Sticking
• Replacing a Hydraulic Motor

View all 7

Power Pack FAQ 11

• Adjustment Of The Flow Control
• Power Pack Is Running Hot
• Pressure Spikes
• Power Pack is leaking oil
• Hydraulic Motors Not Spinning

View all 11

Reclaim System FAQ 1

• Pur-Clean Reclaim System - Trouble Shooting

RO System FAQ 0