Parts FAQ

What Kind Of Oil Should You Use In Your Lubricator Bowls
Many customers use the incorrect type of lubricating oil in lubricators that cause the polycarbonate bowls to prematurely crack.  The typical air tool oil u...
Mon, 19 Nov, 2018 at 4:35 PM
Hydrominder Troubleshooting Chart
Please refer to the chart below to troubleshoot your hydrominder.  If you have any questions after troubleshooting your unit please feel free to contact Son...
Wed, 26 Sep, 2018 at 5:20 PM
Sonny's Heco Speed Controller
The new Sonny's Speed Controller takes the work out of calibrating your chain, at a push of a button you can calibrate your 12 tooth SC78 chain or your ...
Tue, 6 Nov, 2018 at 2:37 PM
Mac Valves Are Sticking
The Mac Valve has an internal rubber plunger which opens and closes the ports which allows air to pass through to a cylinder, air pump etc.. The following c...
Thu, 11 Oct, 2018 at 9:56 AM
Replacing a Hydraulic Motor
Why is it important to replace the motor that is currently being used on your equipment with the same one? Hydraulic motors are used with most of your e...
Tue, 27 Nov, 2018 at 4:50 PM
Dosatron FAQ
What is suggested maintenance? Replace lower end seal kit every 12 months. What is maximum water temperature? 104 degrees Fahrenheit. What dilution ...
Mon, 7 Jan, 2019 at 2:35 PM
Kick Off Plate
The kick off plate is a part that is used at the end of your tunnel to help the car roll off the conveyor.  This part is mainly used when customer have a fr...
Mon, 7 Jan, 2019 at 3:47 PM