Before we start, make sure to get a copy of the owner’s manual which you can download at www.sonnysdirect.com and review all the safety information related to this procedure.
Gather the tools and supplies you’ll need which are:
- Safety Glasses.
- Grease gun.
- Marine grease.
- Rag.
Once you have everything ready the first thing you need to do is:
- Daily Maintenance:
- Check all hydraulic, air and chemical lines and fittings for leaks. Repair, or replace, as needed.
- Check electrical fittings and connections; make sure they are seal tight.
- Check both brush units for proper operation and retract operation, listening for any unusual noises from the equipment.
- Inspect brush cloth for cuts, grease, or oil. Remove and repair, or replace, any cloth panel if any of these conditions are found.
- Check for proper chemical solution delivery
2. Weekly Maintenance:
Grease the brush shaft four bolts flange bearings. Do not allow grease to come in contact with brush cloth.
3. Monthly Maintenance:
- Inspect all hardware and fittings for tightness.
- Grease the brush hanger pillow block bearings. Do not allow grease to come in contact with brush cloth.
- Inspect soap solution spray nozzles for wear. Replace as necessary
- Thoroughly clean the equipment and framework.
4. Semi-Annually Maintenance:
- Carefully inspect brush equipment cloth for wear and damage. Replace as necessary.