High Pressure FAQ
Why am I not getting pressure out of my omni nozzles? The omni is a high pressure piece of equipment that uses 10 zero degree nozzles on each manifold. ...
Wed, 3 Oct, 2018 at 4:27 PM
All of our Sonny's high pressure equipment; Omni, Pendulum, Spinners, are fed through a Wanner high pressure diaphragm pump. The wanner pump may be gra...
Tue, 6 Nov, 2018 at 4:19 PM
The Omni baskets are meant to follow the vehicle smoothly through the washing cycle. If the baskets on your Omni's are not moving smoothly check for...
Wed, 7 Nov, 2018 at 2:57 PM
The spinner system, pivoting, stand alone or pendulum attached, works with high pressure water that gets fed by a high pressure pump station. The T-bars ar...
Tue, 6 Nov, 2018 at 4:14 PM
If your Omin baskets are slamming or moving too fast while following the vehicle, do the following: If you are using an oil reservoir Adjust the bras...
Wed, 7 Nov, 2018 at 2:58 PM
The Octopus mirror rinse uses two - four nozzle spinners on the PS & DS. If the arms are not spinning check for the following: Check the nozzles for...
Wed, 7 Nov, 2018 at 2:59 PM
Pendulum wheel blaster uses a high pressure pump to provide 600-800 PSI to the spinner nozzles. If the spinners are not spinning please check for the follow...
Wed, 7 Nov, 2018 at 3:06 PM
The Omni is a high pressure piece of equipment that uses 0 degrees plus nozzles and a long aerated nozzle which allows the water to flow with a more precise...
Wed, 12 Dec, 2018 at 9:23 AM
Before we start, make sure to get a copy of the owner’s manual which you can download at www.sonnysdirect.com and review all the safety information relat...
Mon, 16 Mar, 2020 at 3:34 PM
Before we start, make sure to get a copy of the owner’s manual which you can download at www.sonnysdirect.com and review all the safety information rel...
Mon, 16 Mar, 2020 at 4:03 PM